97EditingE7. Press the STOP 3 button on the wireless controllerto stop dubbing.Audio device: Stop playback.Set the zero set memory at the end of the scene you wish to dub audio. Thecamcorder will automatically stop audio dubbing at that point.Playing Back the Added SoundYou can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjustthe balance of both sounds.1. Press the 12bit AUDIO OUT button on the wirelesscontroller.• The setting changes with each press of the button.• STEREO1: Plays back the original sound.• STEREO2: Plays back the added sound.• MIX/FIXED: Plays back stereo 1 and stereo 2 in the same level.• MIX/VARI.: Plays back stereo 1 and stereo 2. The mix balance can be adjusted.2. If you have selected [MIX/VARI.], adjust the mixbalance with the ST-1/ST-2 buttons on the wirelesscontroller.• A bar showing the balance appears for 4 seconds.• Press the ST-1 button to increase the volume of Stereo 1 and the ST-2 button toincrease the volume of Stereo 2.The camcorder resets to [STEREO1] when you turn the camcorder off. However,the mix balance is memorized by the camcorder.CARD CAMERACARD CAMERAPLAY (VCR)CAMERAREW PLAY FFMENURECPAUSEZERO SETMEMORYAUDIO DUB.STOPSETAV INSERTPAUSE SLOW//×2AV DVSELF T.TV SCREENDATA CODECARD12bitAUDIO OUTCARDPLAY MODESEARCH SELECTSLIDE SHOWMIX BALANCEST-1 ST-2ON/OFFD.EFFECTSSELF T.TV SCREENDATA CODECARD12bitAUDIO OUTCARDPLAY MODESEARCH SELECTSLIDE SHOWMIX BALANCEST-1 ST-2ON/OFFD.EFFECTS
