104 EditingEAudio DubbingYou can add sound from audio devices (AUDIO IN) or with the built-in or an externalmicrophone (MIC. IN).❍ Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.Audio dubbing will stop if the tape has a blank section or a section recorded inLP mode, 16-bit or 12-bit 4-channel sound. In above case, create a copy in SPmode 12-bit audio sound using the analog line-in function.❍ Do not connect/disconnect any cable to/from the camcorder while dubbing.❍ You cannot use the DV terminal for audio dubbing.❍ If you add sound to a tape not recorded with this camcorder, sound qualitymay decrease.❍ Sound quality may decrease when you add sound to the same scene for morethan 3 times.Connecting an Audio DeviceYou can monitor the picture on the LCD screen or a TV connected via the S-videoterminal, and check the sound with the built-in speaker or headphones.RLSTV-250N Stereo Video Cable(supplied)Signal flow
