118 Using a Memory CardESelecting the Drive ModeYou can choose between three drive modes (recording modes).Continuous ShootingYou can capture a quick series of still images with the continuous shooting function.1. Set the camcorder to CARD CAMERA mode.2. Open the menu and select [CAMERA SET UP]. Select [DRIVE MODE], setit to [CONT. ] and close the menu.“ ” appears on the screen.3. Press and hold the PHOTO button to record the still images.A series of still images will be recorded.4. Release the PHOTO button to end recording.❍ Maximum number of continuous shots at one time:* These figures are approximate and vary with the recording conditions and subjects.Sufficient space on the memory card is required. Continuous shooting stops whencard is full.❍ This function can be assigned to the CSTM KEY ( 52).❍ The range of the flash decreases in continuous shooting mode. Werecommend recording close to the subject when using the flash.CARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERADRIVE MODE•••SINGLECAMERA SET UP( 42)Still Image Size Built-in flash Frames perSecond Maximum Numberof Continuous Shots1632 × 1224 Flash OFF/ON 2 frames 10 images1280 × 960 Flash OFF 3 frames 10 imagesFlash ON 2 frames 10 images640 × 480 Flash OFF 3 frames 30 imagesFlash ON 2 frames 30 imagesContinuous Captures a quick series of still images while you pressthe PHOTO button.AEB (Auto Exposure Bracketing) Captures a still image in three different exposuresjust by pressing the PHOTO button once.Single Records a single still image when you press thePHOTO button.
