98 EditingERecording from Digital VideoDevices (DV Dubbing)You can record from other digital video devices equipped with a DV terminal withvirtually no loss in picture and sound quality.❍ When recording from digital video devices, make sure that “AV \ DV” is notdisplayed on the screen. If “AV \ DV” is displayed, change the setting( 101).❍ Anomalous signals sent from the connected device may be recorded asanomalous picture (although it may not appear so on the screen), or it may notbe recorded at all.❍ Copyright protected signals cannot be recorded.❍ Blank sections may be recorded as anomalous picture.❍ If the picture does not appear, reconnect the DV cable or turn the camcorderoff and back on again.❍ You can only record signals from devices with the logo recording in SDsystem in SP or LP format.❍ You can connect only one device with the DV cable.❍ You can use the camcorder for playback and recording without reconnectingthe DV cable.1. Connect the camcorder to the digital video device.See Connecting a Digital Video Device ( 96).2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.“DV IN” appears.3. Connected device: Load the recorded cassette.4. Press the REC PAUSE button.In record pause mode and during recording, you can check thepicture on the screen.5. Connected Device: Play back the tape.6. Press the e/a button when the scene you wish torecord appears.7. Press the 3 button to stop recording.• Press the e/ a button to pause recording.• Press the e/ a button again to restart recording.8. Connected Device: Stop playback.CARD CAMERACARD CAMERAPLAY (VCR)CAMERA
