53Using the Full Rangeof FeaturesEOther Camcorder SettingsBeepYou will hear a beep upon camcorder operations such as power on/off, start/stop, self-timer countdown, automatic shut-off, and unusual conditions of the camcorder. Thebeep will not be recorded.If you turn off the beep, all camcorder sounds including the ones of the My Camerasettings will be turned off.To turn the beep off, open the menu and select [SYSTEM]. Select [BEEP],set it to [OFF] and close the menu.Turning Off the Tally LampThe tally lamp indicates that the camcorder is recording, receiving signals from thewireless controller or counting down for the self-timer. However, the flashing may bereflected in the lens when recording close-ups or through glass, and you maytherefore decide to turn it off.Open the menu and select [SYSTEM]. Select [TALLY LAMP], set it to [OFF]and close the menu.The tally lamp still lights up when the camcorder receives a signal from the wirelesscontroller, or during self-timer countdown.Recording in 16:9 (Wide Screen TV Recording)You can record in the 16:9 format for playback on wide screen TVs.To switch 16:9 on, open the menu and select [CAMERA SET UP]. Select[16:9], set it to [ON] and close the menu.”16:9” appears.CARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERACARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERACARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERABEEP•••••••••ONSYSTEM16:9•••••••••OFFCAMERA SET UP( 42)( 42)TALLY LAMP•••ONSYSTEM( 42)