LAN settings• Change LANEnables/disables either wireless LAN or access point mode.• Wireless LAN setupIf your wireless router is compatible with WPS, set up wireless LAN following the on-screen instructions.If not, select one of the setup methods below.◦ Standard setupSelect when you perform settings for wireless LAN manually using the operation panel of themachine.◦ WPS (Push button)Select when you perform settings for wireless LAN using a wireless router supporting a Wi-FiProtected Setup (WPS) push button method. Follow the on-screen instructions during setup.◦ Other setupManual setupSelect when you perform settings for wireless LAN manually. You can specify multiple WEPkeys.WPS (PIN code)Select when you perform settings for wireless LAN using a wireless router supporting a Wi-FiProtected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.Cableless setupSelect if you specify the settings of the access point information to the machine directly from adevice (such as a smartphone) without operating the wireless router. Follow the on-screeninstructions of the connecting device for the setup procedure.• AP mode settingsWhen you use the machine as an access point (wireless router), specify the access point name (SSID)and the security setting.Using the Machine with the Access Point Mode• Print LAN detailsYou can print out the network settings of the machine such as its IP address and SSID.For more information on the machine's network setting is printed out, refer to Printing Out NetworkSetting Information.Important• This printout contains valuable information about your computer. Handle it with care.• Other settingsImportant• You cannot select the items below when LAN inactive is selected for Change LAN.◦ Set printer nameSpecifies the printer name. You can use up to 15 characters for the name.211
