A Message Is DisplayedThis section describes some of the errors or messages.Note• A Support Code (error number) is displayed on the computer or on the LCD for some error or message.For details on errors with Support Codes, refer to List of Support Code for Error.If a message is displayed on the LCD, see below.• A Message Is Displayed on the LCDIf a message is displayed on the computer, see below.• The Inkjet Printer/Scanner/Fax Extended Survey Program Icon AppearsA Message Is Displayed on the LCDConfirm the message and take an appropriate action.• Check page size Press [OK]The size of the loaded paper is different from that specified in the paper size setting.Load the same size of paper as that specified in the paper size setting, then press the OK button.• Data error Press [OK]A power failure has occurred or the power cord has been unplugged when the faxes are stored in themachine's memory.Important• If a power failure occurs or you unplug the power cord, all faxes stored in the machine's memoryare deleted.• For details on how to unplug the power cord, see Notice for Unplugging the Power Cord.Press the OK button.After pressing the OK button, the list of the faxes deleted from the machine's memory (MEMORYCLEAR REPORT) will be printed.For details, refer to Summary of Reports and Lists.• Cannot connect to the server; try againYou cannot connect to the server due to some communication error.Press the OK button to dismiss the error, then try again after a while.680
