Security controlCheck6 Is Dial tone detect set to ON?Resend the fax after a while.If you still cannot send the fax, select OFF for Dial tone detect in Adv. FAX settings under Fax settings.Adv. FAX settingsCheck7 Is the fax number registered correctly in the machine's directory?Check the recipient's fax/telephone number, correct the fax/telephone number registered in the machine'sdirectory, then send the document again.Changing Registered InformationNote• You can check the registered information in the machine's directory by printing RECIPIENT TELEPHONENUMBER LIST.Summary of Reports and ListsCheck8 Does an error occur during transmission?• Ensure that a message is displayed on the Fax standby screen. When a message is displayed on the Faxstandby screen, check the cause.A Message for Faxing Is Displayed on the Fax Standby Screen• Print ACTIVITY REPORT and check for an error.Summary of Reports and ListsCheck9 Is the document loaded properly?Remove the document, then reload it on the platen glass or in the ADF.Loading OriginalsCheck10 Does a printer error occur?Ensure that an error message is displayed on the LCD. When an error message is displayed on the LCD, checkthe cause.When the error message with the support code is displayed, refer to List of Support Code for Error.When the error message without the support code is displayed, refer to A Message Is Displayed.If you are in a hurry, press the Stop button to close the message, then send the fax.Check11 Is the telephone line connected correctly?Reconnect the telephone line cable to the telephone line jack.Basic ConnectionIf the telephone line is connected correctly, there is a problem with your telephone line. Contact your telephonecompany and the manufacturer of your terminal adapter or telephone adapter.632
