• Only 300 dpi or 400 dpi can be set when Start OCR is selected in Application Settings.Document Scan Orientation Settings...This appears when you select ADF or Auto for Select Source.Click to display the Document Scan Orientation Settings dialog in which you can set the orientationand binding side of the documents to be scanned from the ADF.Important• Binding Side cannot be specified when scanning only the front side of each document.Image Processing SettingsClick (Right Arrow) to set the following. Available setting items vary by Select Source.• When Select Source is Auto:Apply recommended image correctionApplies suitable corrections automatically based on the item type.Important• The color tone may differ from the source image due to corrections. In that case,deselect the checkbox and scan.Note• Scanning takes longer than usual when you enable this function.• When Select Source is Photo:Important• When Color Mode is Black and White, Image Processing Settings is not available.Sharpen outlineEmphasizes the outline of the subjects to sharpen the image.• When Select Source is Magazine or Document:Note• The displayed items vary by Select Source and Color Mode.Apply Auto Document FixSelect this checkbox to sharpen text in a document or magazine for better readability.423
