Chapter 8 Troubleshooting 8-92. Click on the application once to highlight it.3. Select Get Info from the File Menu. The Info window will appear.4. In the Preferred Size box, enter a new value. Increasing the PreferredSize by 1,000K is a good start.5. Close the Get Info window.You cannot change an application’s memory allocation while theapplication is running.Ensure that you are not adding more memory than your computer has.For example, if your Mac has 32MB of RAM and your System Softwareuses 15MB of RAM, you have approximately 17MB of free RAM. If yourapplication is running at 14MB (14,000K), this now leaves less than 3MBof free RAM.SpoolMaster Memory AllocationIf you are encountering problems while using background printing, werecommend allocating more memory to SpoolMaster. Follow the stepslisted below:1. Locate the SpoolMaster application program in the ExtensionsFolder (in the System Folder).2. Click on the SpoolMaster application once to highlight it.3. Select Get Info from the File Menu. The Get Info window willappear.4. In the Preferred Size box, enter 512K.The 512K setting is usually adequate when printing most files. If you areprinting very complex documents or a large number of batches, tryallocating 1,024K (1MB) to 2,048K (2MB).Troubleshooting
