Chapter 5 Scanning 91• Filename and NumberingOn the Scan to Save tab, in the Filename box, enter the base filename you want to use to define your own preference for namingfiles. For Numbering, click whether you want to continuenumbering from the previously saved file, or to begin thenumbering from the specified number.MultiPASS uses a naming rule for automatically assigning filenames to scanned images that are saved as files. This ruleincludes a base file name plus a sequential number.For example, if you enter SavedScan as the base file name, andyou specify the numbering to start at 100, your subsequent imagefiles would be named: SavedScan100, SavedScan101, and so on.• Save as TypeIf available, click the file format in which you want your scannedimage saved, such as BMP or TIF. This option is available only forthose scan destinations where saving the image file isappropriate.• Image TypeIf available, click the type of image you are scanning, such asBlack and White.• Image Quality (Resolution)If available, click the resolution (in dots per inch, dpi) for theimage you are scanning. A higher resolution results in a betterimage quality, but may take longer to scan. A lower resolutiongenerally scans faster, but may generate a lesser quality image.• Paper Size (if available)Click the physical size of the image being scanned, such as letteror business card size.If you want to specify a custom paper size, click Custom. Then,click the unit of measure by which you want to define yourcustom paper size. In the Width and Height boxes, enter thedimensions of your custom paper size.
