Canon PIXMA G2070 Series Online Manual

Also see for PIXMA G2070 Series: Getting started Online manual

Page SizeSelects a page size.Ensure that you select the same page size as you selected within the application.If you select Custom..., the Custom Paper Size dialog box opens and allows you to specify anyvertical and horizontal dimensions for the paper size.Printer Paper SizeSelects the size of paper actually loaded into the printer.The default setting is Same as Page Size to perform normal-sized printing.If you select a paper size that is smaller than the Page Size, the document size will be reduced. If youselect a paper size that is larger, the document size will be enlarged.Also if you select Custom..., the Custom Paper Size dialog box opens and allows you to specify anyvertical and horizontal dimensions for the paper size.CopiesSpecifies the number of copies you want to print. You can specify a value from 1 to 999.Important• If the application used to create your document has a similar function, specify the number of copieswith the application without specifying it here.Print from Last PageCheck this check box when you want to print from the last page in order. If you do this, you do not needto sort the pages into their correct order after printing.Uncheck this check box to print your document in normal order, starting from the first page.CollateCheck this check box to group together the pages of each copy when you want to print multiple copies.Uncheck this check box when you want to print with all pages of the same page number groupedtogether.Important• When the application software that you used to create the document has the same function,give priority to the printer driver settings. However, if the print results are not acceptable, specifythe function settings on the application software. When you specify the number of copies andthe printing order with both the application and this printer driver, the number of copies may bemultiplied numbers of the two settings or the specified printing order may not be enabled.OrientationSelects the printing orientation.If the application used to create your document has a similar function, select the same orientation thatyou selected in that application.PortraitPrints the document so that its top and bottom positions are unchanged relative to the paper feeddirection. This is the default setting.LandscapePrints the document by rotating it 90 degrees relative to the paper feed direction.You can change the rotation direction by going to the Maintenance tab, opening the CustomSettings dialog box, and then using Rotate 90 degrees left when orientation is [Landscape]check box.174