Canon PIXMA G2070 Series Online Manual

Also see for PIXMA G2070 Series: Getting started Online manual

Perform Borderless PrintingThe borderless printing function allows you to print data without any margin by enlarging the data sothat it extends slightly off the paper. In standard printing, margins are created around the document area.However, in borderless printing function, these margins are not created. When you want to print data suchas a photo without providing any margin around it, set borderless printing.You can also set borderless printing on the Basic Settings Tab.Setting Borderless Printing1. Open the printer driver setup window1.2. Set borderless printing2.Add a checkmark to Borderless Printing on the Page Setup tab.Click OK when the confirmation message appears.When a message prompting you to change the media type appears, select a media type from the listand click OK.3. Check the paper size3.Check the Page Size list. When you want to change it, select another page size from the list. The listdisplays only sizes that can be used for borderless printing.4. Adjust the amount of extension from the paper4.If necessary, adjust the amount of extension using the Amount of Extension slider.Moving the slider to the right increases the amount extending off the paper, and moving the slider tothe left decreases the amount.It is recommended to set the slider at the second position from the right for most cases.Important• When the Amount of Extension slider is set to the rightmost position, the back side of thepaper may become smudged.187