Canon PIXMA G2070 Series Online Manual

Also see for PIXMA G2070 Series: Getting started Online manual

Important• Uncheck this check box under normal circumstances.Print after creating print data by pageThe print data is created in page units, and printing starts after the processing of one page of printdata is complete.If a printed document contains unintended results such as streaks, selecting this check box mayimprove the results.Important• Uncheck this check box under normal circumstances.Prevention of Print Data LossYou can reduce the size of the print data that was created with the application software and then printthe data.Depending on the application software being used, the image data may be cut off or may not beprinted properly. In such cases, select On. If you will not be using this function, select Off.Important• When using this function, the print quality may drop depending on the print data.Unit of Print Data ProcessingSelects the processing unit of the print data to be sent to the printer.Select Recommended under normal circumstances.Important• A large amount of memory may be used for certain settings.Do not change the setting if your computer has a small amount of memory.Print WithSpecify the ink to be used when printing.Select from All Colors (Default) and Black Only.Important• When the following settings are specified, Black Only does not function because the printeruses an ink other than black to print documents.Other than Plain Paper, Envelope, Ink Jet Hagaki (A), Hagaki K (A), Hagaki (A), orHagaki is selected for Media Type on the Media/Quality tabA checkmark is added to Borderless Printing on the Page Setup tab• Do not detach the print head that is not in use. Printing cannot be performed while either printhead is detached.Stamp/Background dialog boxDepending on the environment, Stamp and Background may not be available.The Stamp/Background dialog box allows you to print a stamp and/or background over or behind thedocument pages. In addition to the pre-registered ones, you can register and use your original stamp orbackground.179