Canon PIXMA G2070 Series Online Manual

Also see for PIXMA G2070 Series: Getting started Online manual

1. Roll up paper in opposite direction to paper curl as shown below.1.2. Check that paper is now flat.2.We recommend printing curl-corrected paper one sheet at a time.Note• Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward.•Follow the instructions below to curl the paper outward up to 0.1 in. / 3 mm (C) in height before printing.This may improve the print result.(B) Print sideWe recommend feeding paper that has been curled outward one sheet at a time.Check4 Set printer to prevent paper abrasion.Adjusting the setting to prevent paper abrasion will widen the clearance between the print head and the paper.If you notice abrasion even with the media type set correctly to match the paper, set the printer to prevent paperabrasion using the operation panel or the computer.This may reduce the print speed.* Once you have finished printing, turn off the printer, turn it on and undo this setting. Otherwise, it will apply tosubsequent print jobs.Press (Setup) button repeatedly until "12" appears on LCD and Color button to set the printer to preventpaper abrasion.Check5 If brightness is set low, increase brightness setting and try printing again.If you are printing with a low brightness setting on plain paper, the paper may absorb too much ink and becomewavy, causing paper abrasion.• Printing from your computer (Windows)•297