Canon PIXMA G2070 Series Online Manual

Also see for PIXMA G2070 Series: Getting started Online manual

Printer Does Not PrintCheck1 Make sure printer is turned on.If not, make sure the printer is securely plugged in and press ON button to turn on.The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit.Note• If you are printing large data such as photos or other graphics, printing may take longer to start. The ON•lamp flashes while the computer is processing data and sending it to the printer. Wait until printing starts.Check2 Make sure printer is properly connected to computer.If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When theUSB cable is securely plugged in, check the following:• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the•computer, and retry the printing. If printing starts normally, there is a problem with the relay device. Contactthe vendor of the relay device.• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.•Check3 Check to see (ink) is flashing.If (ink) flashes, refill the ink tank.Refilling Ink TanksCheck4 Check to see the Alarm lamp is lit or flashing.If the message is displayed on the computer, follow the instruction or check the error code on the LCD of theprinter and resolve the error.When Error OccurredCheck5 Make sure paper settings match information set for rear tray.If the paper settings do not match the information set for the rear tray, an error code appears on the LCD and amessage appears on the PC. Follow the instructions on the LCD to solve the problem.Note• You can select whether the message which prevents misprinting is displayed.•To change the message view setting when printing using the printer driver:283