7ENGLISH6 Installing the Printer DriverUse USB cable.Recommended: Canon or other computer manufacturer cable, up to 5 meters in length. Installing the Printer Driver – Windows• When performing infrared communication, requirements for using the computer must be satisfied.Refer to “Printing Data through Infrared Communication” on page 19 before installing the printer driver.• Before installing the driver, close any open software applications (including anti-virus, computersecurity, and other software).• When using an optional Bluetooth unit*, connect this printer to your computer with a USB cableand install the printer driver.Additional setup operations are required to perform printing through Bluetooth wirelesstechnology. Refer to the Bluetooth Unit BU-10 User’s Guide for details.* The Bluetooth unit is not available to some regions due to the law of the countries or theregulations. For details, contact your local Canon service representative.• Do not disconnect the cable or remove the CD-ROM during the installation. The driver cannot becorrectly installed.• The screens below refer to Windows XP Service Pack 2 (hereafter, called Windows XP SP2)installation. Screens may differ depending on the operating system you are using.• When installing the printer driver in Windows XP or Windows 2000, log on to the system as amember of the Administrators group.If the following screen appears automatically, click Cancel and follow steps 1 to 10 to install the printerdriver.Special Notes for Windows 98 or Windows Me USB UsersClick Cancel to quit the screen and turn off the printer. Next, remove and replace the USB cableconnected to your computer.