25ENGLISH(3) Turn on and set up the device for direct printing.When the connection between the device and printer has been established, the POWERlamp on the printer flashes once.* The power-on sequence may differ depending on the model or brand of the device.Either of the following icons will display on the LCD display of the device when the printer is correctlyconnected.A PictBridge compliant device.A Canon Bubble Jet Direct compatible digital camera. Printing Photographs Directly from a PictBridge CompliantDevice Default Device SettingsWhen a PictBridge compliant device is connected and printing is started with no printing option selected,this printer operates based on the following default settings:- Paper size ............................. 10×15cm / 4"×6"- Paper type ............................ Photo (Photo Paper Plus Glossy)- Layout .................................. Borderless- Trimming ............................. Off (No trimming)- Image optimize .................... Exif Print- Date print ............................. Off (No printing)About the Settings Explained BelowThe settings explained on the following pages cannot be made on some devices. If any setting cannot bemade, the default setting explained above is used.Names of settings that are displayed on the Canon PictBridge compliant device are used in the descriptiongiven below.Different names may be displayed on your device depending on the brand or model.For details, refer to your device’s instruction manual. About Image Data Format for PrintingThis printer can handle only Exif / JPEG and PNG image data to produce photos. About “Paper Size” and “Paper Type”To change the paper size or paper type, operate your device to select the PictBridge print setup mode andconfirm or check the settings.By default, 10×15cm / 4"×6" is selected in “Paper Size” and “Photo” (Photo Paper Plus Glossy) isselected in “Paper Type” for this printer.To use Photo Paper Pro, select “Fast Photo” in “Paper type”.Canon iP90 Setup Utility allows you to make these settings. For details, refer to the User’sGuide.
