22ENGLISH Changing the Document Print Settings(1) Click Infrared / Bluetooth connection Print Settings tab.(2) Click Change on Document Print Settings.The Document Printing dialog box appears.(3) Select the printing type for the document.(4) Click Send.You can perform printing from a PDA or mobile phone with the specified media type andlayout.For details about printing from PDA or mobile phone, refer to the section “PerformingInfrared Communication” on page 22. Performing Infrared CommunicationWhen performing infrared communication, also refer to your computer, mobile phone or PDA manual.1111 Ensure that the Universal AC Adapter is connected securely.When using an optional battery, ensure that it has been charged.2222 Open the Paper Support and turn on the printer.3333 Load the paper on the Paper Support.Bible, Mini 6-hole, A5 paper are used for apersonal organizer.When printing these papers;• Select 93×170mm for Bible, 80×126mm for Mini6-hole and 210×148mm for A5 as paper size.• Load only one sheet at a time.• Do not use paper thinner than 64gsm or 17lb.Click Change on Document Printing dialog to change the following settings.Time difference with GMT: when printing time-specifiable data, such as a schedule, youcan reflect the time difference by specifying the country in which the data was created.Language: You can adopt the Language if incorrect text is printed.Following limitations apply on transmittable data- It does not support printing a downloaded content or photo and a photo attached to an email forsecurity reason.- It does not support printing video files.- Depending on your device, the Fine print quality option may not be available due to therestriction on the infrared transfer capacity.- Depending on your device, it may not print data stored in a memory card.- It automatically sets the image quality and orientation (horizontal or landscape) according to theimage size.- It automatically sets the margin according to the image size.- Depending on the size of an image, it may take a while for this printer to start to print afterstarting the infrared transfer.