Chapter 473Faxing2Use [] or [] to select the resolution.3Press [OK].zAdjusting the Scan ContrastContrast is the degree of difference between light and dark. Increasing the contrast settingfurther blackens dark areas and whitens bright areas. Whereas decreasing the contrast settingreduces the difference between bright and dark areas. You can adjust the contrast betweenthree gradations.1Press [FAX], then press [Exposure].2Use [] or [] to select the contrast.Pressing [] decreases the density, and pressing [] increases the density.3Press [OK].Sending MethodsThere are three methods of sending faxes:zMemory sendingzManual sendingzSending from your computerThis section explains how to use these methods.zSending from Your Machine (Memory Sending)1Load the document on the Platen Glass or in the ADF.2Press [FAX].3Adjust the settings for your document as necessary.STANDARD:Suitable for text-only documents.FINE:Suitable for fine-print documents.PHOTO:Suitable for photographs.NoteWhen sending color faxes, selecting has the same effect as selecting .ImportantWhen sending a double-sided document, set the document on the Platen Glass. You cannotscan double-sided document from the ADF.NoteFor details on document requirements and how to load documents, see “Loading Documents”on page 19.SCANCONTRAST-LTDK+