80 Chapter 4Faxing Receive ModesSelect the receive mode according to your needs.z If You Want to Receive Only Faxes Automatically with Your Machine, orYou Have a Dedicated Telephone Line for Fax Use Only:z Select .z If You Receive Mainly Voice Calls and Sometimes Faxes, or You Want toReceive Faxes Manually:z Select .ImportantThe machine cannot receive faxes when the power is turned OFF. Press [ON/OFF] to turn thepower ON.NoteThe machine can receive faxes in any mode, such as copy mode (when [COPY] is pressed),fax mode (when [FAX] is pressed), or scan mode (when [SCAN] is pressed). However, whenthe machine received faxes in other than fax mode, they will not be printed immediately afterreceived but printed after about three minutes automatically. If you want to print the receivedfaxes immediately, press [FAX].z When you receive a fax call: The machine will receive the fax automatically.z When you receive a voice call: You will not be able to answer the call.NoteThe telephone does not ring when it receives a fax call. If you want it to ring, connect atelephone to your machine and enable the setting (see “INCOMINGRING” on page 95). You can also select the number of rings before the machine answers(See “INCOMING RING” on page 95).z When you receive a fax call: The telephone will ring. Pick up the handset and if youhear a high-pitched signal, press [Black] or [Color] onthe machine to receive the fax.z When you receive a voice call: The telephone will ring. Pick up the handset to answerthe call.z For remote receiving: If you are far from your machine, dial 25 (the remotereceiving ID) on your telephone to receive faxes.