| 
Chapter 7 95Changing the Machine SettingsEnables/disables Error Correction Mode (ECM) sending.z PAUSE TIMESelects the pause length when you press [Redial/Pause].z AUTO REDIALEnables/disables automatic redialing.z TX START SPEEDSelects the speed at which the machine starts transmitting.z COLOR TXWhen faxing in color from the ADF, enables/disables automatic converting the image intoblack and white before sending if the destination fax device does not support color.z TX REPORTEnables/disables automatic printing of a transmission report after sending.z DIAL TONE DETECTIf you selects , the machine transmits after confirming the dial tone. This functionmay not be supported depending on your country or area. RX SETTINGSz ECM RXEnables/disables Error Correction Mode (ECM) during reception.z FAX/TEL AUTO SWIf you select as the receive mode, customizes its settings.z DRPD:FAX RNG PATIf you select as the receive mode, select the ring pattern for the machine. Thissetting is only available in US and Canada.z INCOMING RINGIf you select , or as the receivemode, enables/disables ringing for fax calls (A telephone must be connected to yourmachine for ringing to occur).REDIAL TIMES: If you select as , enables setting thenumber of redialings.REDIAL INTERVAL: If you select as , enables setting thelength of time between redialings.ATTACH TX IMAGE: If you select or TX> as , enables/disables printing the first pageof the fax under the report (black & white faxes only).RING START TIME: Selects the time the machine takes to check whether a call is afax or voice call.TEL RING TIME: Selects the ring length for voice calls.DEFAULT ACTION: Selects whether the machine switches to receive mode afterthe ring time has elapsed, or whether it disconnects the call.RING COUNT: If you select as , selects the numberof rings for fax calls. |
