136Setting MenuAccessoriesAppendixBefore UseIndexBasic GuideAdvanced GuideCamera BasicsAuto M o d e /Hybrid Auto M o d eOther S h o o t i n g M o d e sPModeTv, Av, M , a n d C M o d ePlaybackModeWi-Fi Functions● If during connection a message on the camera requests you toenter the nickname, follow step 2 in “Connecting via NFC WhenCamera Is Off or in Shooting Mode” (= 134) to enter it.● The camera does not keep a record of smartphones you connectto via NFC in Playback mode.● You can preset images to transfer at your desired size (= 152).Sending to a Smartphone Assigned to theButtonOnce you have connected to a smartphone initially by pressing the [ ]button, you can simply press the [ ] button after that to connect again forviewing and saving camera images on your connected device.These steps show how to use the camera as an access point, but you canalso use an existing access point (= 139).1 Install Camera Connect.z For an iPhone or iPad, find CameraConnect in the App Store and downloadand install the app.z For Android smartphones, find CameraConnect in Google Play and downloadand install the app.2 Press the [ ] button.z Press the [ ] button.z If the [Device Nickname] screen isdisplayed, press the [ ][ ] buttons orturn the [ ] dial to choose [OK], and thenpress the [ ] button.● Connections require that a memory card be in the camera.● You can also change the camera nickname on the screen instep 2 (= 32).● Not all NFC-compatible smartphones have an N-Mark ( ). Fordetails, refer to the smartphone user manual.● You can also send multiple images at once and change the imagesize before sending (= 150).● To disable NFC connections, choose MENU (= 31) ► [ 4] tab► [Wi-Fi Settings] ► [NFC] ► [Off].Connecting via NFC When Camera Is in Playback Modez Press the [ ] button to turn the cameraon.z Touch the smartphone with CameraConnect installed (= 134) against thecamera’s N-Mark ( ).z Press the [ ][ ][ ][ ] buttons to choosean image to send, and then press the [ ]button. [ ] is displayed.z To cancel selection, press the [ ] buttonagain. [ ] is no longer displayed.z Repeat this process to choose additionalimages.z After you finish choosing images, pressthe [ ] button, choose [OK], andthen press the [ ] button.z Press the [ ][ ] buttons to choose[Send], and then press the [ ] button.z The images are now sent. Theconnection is ended automatically afterthe image is sent.
