142Setting MenuAccessoriesAppendixBefore UseIndexBasic GuideAdvanced GuideCamera BasicsAuto M o d e /Hybrid Auto M o d eOther S h o o t i n g M o d e sPModeTv, Av, M , a n d C M o d ePlaybackModeWi-Fi Functions3 Choose [ ].z Press the [ ][ ][ ][ ] buttons or turnthe [ ] dial to choose [ ], and thenpress the [ ] button.4 Choose [Add a Device].z Press the [ ][ ] buttons or turn the [ ]dial to choose [Add a Device], and thenpress the [ ] button.5 Choose [WPS Connection].z Press the [ ][ ] buttons or turn the [ ]dial to choose [WPS Connection], andthen press the [ ] button.6 Choose [PBC Method].z Press the [ ][ ] buttons or turn the [ ]dial to choose [PBC Method], and thenpress the [ ] button.7 Establish the connection.z On the access point, hold down the WPSconnection button for a few seconds.z On the camera, press the [ ] button togo to the next step.z The camera connects to the access pointand lists devices connected to it on the[Select a Device] screen.● For information on WPS compatibility and for instructions onchecking settings, refer to the access point user manual.● A router is a device that creates a network (LAN) structure forconnecting multiple computers. A router that contains an internalWi-Fi function is called a “Wi-Fi router”.● This guide refers to all Wi-Fi routers and base stations as “accesspoints”.● If you use MAC address filtering on your Wi-Fi network, be sureto add the camera’s MAC address to your access point. You cancheck your camera’s MAC address by choosing MENU (= 31)► [ 4] tab ► [Wi-Fi Settings] ► [Check MAC Address].Using WPS-Compatible Access PointsWPS makes it easy to complete settings when connecting devices overWi-Fi. You can use either Push Button Configuration Method or PINMethod for settings on a WPS supported device.1 Confirm that the computer isconnected to an access point.z For instructions on checking theconnection, refer to the device andaccess point user manuals.2 Access the Wi-Fi menu.z Press the [ ] button.z Press the [ ] button.z If the [Device Nickname] screen isdisplayed, press the [ ][ ] buttons orturn the [ ] dial to choose [OK], and thenpress the [ ] button.
