171AppendixBefore UseIndexBasic GuideAdvanced GuideCamera BasicsAuto M o d e /Hybrid Auto M o d eOther S h o o t i n g M o d e sPModeTv, Av, M , a n d C M o d ePlaybackModeWi-Fi FunctionsSettingMenuAccessoriesPowering the Camera with Household PowerStill Images MoviesPowering the camera with AC Adapter Kit ACK-DC110 (sold separately)eliminates the need to monitor the remaining battery level.1 Make sure the camera is off.2 Open the cover.z Follow step 1 in “Inserting the BatteryPack and Your Memory Card” (= 19)to open the memory card/battery cover,and then open the coupler cable portcover as shown.3 Insert the coupler.z Holding the coupler with the terminals (1)facing as shown, insert the coupler justas you would a battery pack (followingstep 2 in “Inserting the Battery Pack andYour Memory Card” (= 19)).z Make sure the coupler cable passesthrough the port (1).(1)(2)(1)(1)4 Turn the camera on.z Press the [ ] button.z Images from the camera are nowdisplayed on the TV. (Nothing isdisplayed on the camera screen.)z When finished, turn off the camera andTV before disconnecting the cable.● Touch-screen operations are not supported while the camera isconnected to a television.● Some information may not be available when using a TV as thedisplay (= 192).● Camera operating sounds are not played while the camera isconnected to an HDTV.● When the camera and TV are connected, you can also shootwhile previewing shots on the larger screen of the TV. To shoot,follow the same steps as when using the camera screen.However, AF-Point Zoom (= 53), MF-Point Zoom (= 85),MF Peaking (= 86) and Night Display (= 161) are notavailable.
