176AppendixBefore UseIndexBasic GuideAdvanced GuideCamera BasicsAuto M o d e /Hybrid Auto M o d eOther S h o o t i n g M o d e sPModeTv, Av, M , a n d C M o d ePlaybackModeWi-Fi FunctionsSettingMenuAccessoriesUsing the SoftwareTo utilize the features of the following software, download the softwarefrom the Canon website and install it on your computer.● CameraWindow- Import images to your computer● Image Transfer Utility- Set up Image Sync (= 153) and receive images● Map Utility- Use a map to view GPS information that has been added to images● Digital Photo Professional- Browse, process and edit RAW images● To view and edit movies on a computer, use preinstalled orcommonly available software compatible with movies recorded bythe camera.● Image Transfer Utility can also be downloaded from the ImageSync settings page of CANON iMAGE GATEWAY.Computer Connections via a CableChecking Your Computer EnvironmentThe software can be used on the following computers. For detailedsystem requirements and compatibility information, including support innew operating systems, visit the Canon website.● Windows 8/8.1● Windows 7 SP1● Mac OS X 10.10● Mac OS X 10.9*1 E-TTL mode is used for the flash.*2 M mode is used for the flash.In [ ] shooting mode, E-TTL mode is also available for the flash. In this case,when the flash fires, flash exposure compensation set on the flash is applied tothe flash output level set on the camera.*3 Can be configured only when [Flash Mode] is [Auto] and flash exposurecompensation set on the flash is [+0]. When you adjust flash exposurecompensation on 600EX-RT, 600EX, 580EX II, or 430EX II Speedlites, thecamera display will be updated accordingly.*4 Can be configured when [Flash Mode] is [Manual]. Linked to settings on theflash unit.*5 1/64 for Speedlite 430EX II/430EX/320EX/270EX II/270EX.*6 Configure other options on the flash unit itself. Available with Speedlite580EX II/600EX-RT/600EX/90EX. When this item is not set to [Off], [ShutterSync.] cannot be set to [2nd-curtain]. (If [Shutter Sync.] is set to [2nd-curtain], itwill be changed to [1st-curtain].)*7 Can only be configured when [Flash Mode] is [Auto].*8 Restores all default settings. You can also restore defaults for [Safety FE] and[Red-Eye Lamp] by using [Reset All] on the [ 4] tab on the camera (= 165).● In [ ] shooting mode, icons representing Smiling, Sleeping,Babies (Smiling), Babies (Sleeping), and Children shootingscenes determined by the camera are not displayed, and thecamera does not shoot continuously (= 40).
