88Tv, Av, M, and C ModePlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixBefore UseIndexBasic GuideAdvanced GuideCamera BasicsAuto Mode /Hybrid Auto ModeOther Shooting ModesP Mode● You can also access the screen in step 1 by pressing the [ ]button.● You can also return the AF frame to the original position in thecenter by holding down the [ ] button.● You can also link the Spot AE Point frame to the AF frame(= 79).● You can also configure the AF frame size by pressing the [ ]button and choosing [AF Frame Size] on the [ 3] tab (= 31).+TrackingStill Images Movies● Detects people’s faces, and then sets the focus, exposure (evaluativemetering only), and white balance ([ ] only).● After you aim the camera at the subject, a white frame is displayed aroundthe person’s face determined by the camera to be the main subject, andup to two gray frames are displayed around other detected faces.● When the camera detects movement, frames will follow movingsubjects, within a certain range.● After you press the shutter button halfway, up to nine green frames aredisplayed around faces in focus.● When no faces are detected, or when only gray frames are displayed(without a white frame), pressing the shutter button halfway willdisplay green frames in the areas in focus. Note that the maximumnumber of frames depends on the aspect ratio (= 50) setting.● If no faces are detected in Servo AF (= 89) mode, the AFframe is displayed in the center of the screen when you press theshutter button halfway.● Examples of faces that cannot be detected:- Subjects that are distant or extremely close- Subjects that are dark or light- Faces in profile, at an angle, or partly hidden● The camera may misinterpret non-human subjects as faces.● No AF frames are displayed if the camera cannot focus when youpress the shutter button halfway.Moving and Resizing AF Frames (1-point AF)Still Images MoviesWhen you want to change the position or size of the AF frame, set the AFmethod to [1-point AF].1 Move the AF frame.z Touch the screen. An AF frame isdisplayed in orange where you touched(Touch AF).z Turn the [ ] or [ ] dial to move theAF frame, and press the [ ][ ][ ][ ]buttons to fine-tune the position.z To return the AF frame to the originalposition in the center, press the [ ]button.2 Resize the AF frame.z To reduce the AF frame size, turn the[ ] ring. Turn it again to restore it to theoriginal size.3 Finish the setup process.z Press the [ ] button.● AF frames are displayed at normal size when you use the digitalzoom (= 41) or digital tele-converter (= 87), and in manualfocus mode (= 85).
