6-26Flow of Intelligent Function SettingThe intelligent functions are set according to theprocedure below. For details on the setting method, seeeach setting page. Camera Position SettingsFor details on the preset setting method, see “PresetSetting Tool” (p. 6-16).This selects [Lock camera position] in the IntelligentFunction Setting Tool.If [No] is clicked, select [Lock camera position]. Intelligent Function SettingsWhen you click [Add] in the [Detection Setting List],the [New Detection Settings] dialog box is displayed.Set the [Detection Setting Number] and [DetectionType] of the detection setting you want to add, andthen click [OK].Up to 15 different detection settings can beregistered.(1) [Detection Setting Number]Specify a detection setting number from 1 to 15 for thedetection area you want to set.(2) [Detection Type]Select detection types that suit your purpose from[Moving Object Detection], [Abandoned ObjectDetection], [Removed Object Detection], or [CameraTampering Detection]. For details on detection types,see p. 6-22.To enable detection settings, select [Enable thesedetection settings].Clear this checkbox to disable a setting.Set detection criteria while operating the camera andchecking the image in the image display area.Set e-mail notification, upload, and audio playback tobe performed upon detection.Click [Save settings] to save the settings in thecamera.You can check the detection status of the specifieddetection settings in the event display panel of theAdmin Viewer (p. 7-18).1 Register the camera angle as a preset using thePreset Setting Tool.ImportantIt is strongly recommended that you preset the camera angle inadvance and lock the camera at a preset position with theIntelligent Function Setting Tool. An angle of view that capturesthe target object up close is also recommended.2 Launch the Intelligent Function Setting Tool.3 Click [Yes].4 Select a preset.1 Add detection settings.2 Enable Detection Settings.3 Set detection criteria ([Detection Criteria] tab p. 6-27).4 Set operations to be performed when a change in asubject is detected ([Event] tab p. 6-28).5 Save the detection settings in the camera.6 Check the detection result.(1)(2)
