Preset Setting Tool6-196 Admin ToolsSetting the PresetA preset and home position can be set in one of thefollowing ways. Setting from Camera Angle in the ImageDisplay Area Use the preview frame of the panoramascreen to set presetsUse the preview frame of the panorama screen to setpresets.Be sure to enter the preset name.If you click on the panorama screen, the previewframe will move to center on the clicked point.The settings are reflected in the image display area.If you previewed incorrect settings, etc., and want torestore the settings registered in the camera, click[Restore settings]. Specifying Detailed SettingsIf you want to fine-tune the camera angle or to adjust theimage, etc., click [Detailed Settings] and specify thedetailed settings before saving the preset settings in thecamera.The camera parameters in the image display area areloaded to [Detailed Settings].1 Select the preset you want to set from the [Preset/HomePosition] selection box, and then fill the [Preset Name]field.2 Click the [Obtain/release Camera Control] button toobtain the control privileges of the camera.3 Operate the camera from the image display area, set itto the desired position and click [Quick Registration].1 Select the preset you want to set from the [Preset/HomePosition] selection box, and then fill the [Preset Name]field.2 Click [Detailed Settings] and select the [Show inviewers] checkbox.3 Drag to move or resize the preset preview frame(yellow) shown on the panorama screen to set thepreset.4 Click [Preview settings].5 Click [Save settings] .1 Select the [Show in viewers] checkbox.2 Click [Get camera info].
