6-28(4) [Object Size (%)] [Change Ratio (%)] [Duration (Sec)]Set the lower limit for the size, change ratio, andjudgment time for the set detection area to triggerdetection. If the value set here is exceeded, “Detected”mode is triggered.Click the text box to enter a value directly, or specify avalue using the slider.For details on the setting method, see “SettingDetection Criteria per Detection Type” (p. 6-29). Setting Event Operations ([Event] tab)Set operations to be performed upon detection ofchanges in a subject.[Event] tab(1) Specify the operation timing. (Multiple checkboxes canbe selected.)[ON Event Operation] checkboxWhen selected, the operations set in (2) [E-mailNotification] and [Upload] are performed the momentdetected mode is triggered to ON.[OFF Event Operation] checkboxWhen selected, the operations set in (2) [E-mailNotification] and [Upload] are performed the momentdetected mode is triggered to OFF.[Detected mode Operation] checkboxWhen selected, the operations set in (2) [E-mailNotification] and [Upload] are performed for as longas detected mode is active.(2) Specify the event operation. (Multiple checkboxes canbe selected.)[E-mail Notification] checkboxWhen selected, e-mail notification is performed at thetiming set in (1). [E-mail Notification] must be set inadvance under [Upload] in the Setting page (p. 5-17).[Upload] checkboxWhen selected, upload is performed at the timing setin (1). General upload must be set in advance under[Upload] in the Setting page (p. 5-15).(3) Specify the audio playback timing.[Audio Playback at ON Event] checkboxWhen selected, the sound set in (4) [Sound ClipName] is played at the moment the detected mode istriggered to ON.[Audio Playback at OFF Event] checkboxWhen selected, the sound set in (4) [Sound ClipName] is played at the moment the detected mode isturned OFF.(4) Set the playback sound.[Sound Clip Name]Select the sound that is to be played. The sound clipname set for [Sound Clip Upload] under [Event] in theSetting page is shown in the pull-down list (p. 5-22).[Volume]Set the audio playback volume in the range of 1 to100. Setting Detection AreasSet detection areas in the image display area.Setting a [Rectangular] detection areaBy default, a rectangle is shown in the image display area.Move or resize that rectangle to set a detection area.ImportantIt is recommended that the detection criteria are set in acondition as close as possible to the condition in which thecamera is actually used.(1)(3)(4)(2)
