5-30SD Card Operations (unmount status)(1) [Mount/Unmount]In unmount status, [Mount] will appear. Click [Mount]to mount the SD memory card.NoteSD and SDHC memory cards can be used with the camera.When an SD memory card is inserted in the card slot, it ismounted automatically. It is also mounted automatically ifinserted in the camera at the time of booting.For inserting and removing the SD memory card, see “Using anSD Memory Card” in the “Installation Guide.”(2) [Operation Settings]Set write operations to the SD memory card to [SaveLog] or [Save Log and Images]. If [Save Log andImages] is selected, and a network problem occursduring upload or stream recording, images will besaved to the SD memory card at a frame rate of 1 fps(with image size and image quality set in [Video](p. 5-13)).(3) [Format]Click [Exec] to format the SD memory card.Formatting erases all video and logs on the memorycard.SD Card Operations (mount status)(1) [Mount/Unmount]In mount status, [Unmount] will appear. Click[Unmount] to unmount the SD memory card.(2) [Operation Settings]These settings are the same as (2) [OperationSettings] in “SD Card Operations (unmount status).”(3) [Delete Images]Click [Exec] to delete images from the SD memorycard. During deletion, an indicator will appear to theright of [Exec].Note• It may take 10 minutes or more to delete images from the SDmemory card.• Deleting images takes time, so it is recommended that youstop video transmission and upload processes.(4) [Recreate Image Management Information]Click [Exec] to recreate the image managementinformation.During re-creation, an indicator will appear to the rightof [Exec]. The SD memory card is inaccessible duringthis time.Note• It may take 20 minutes or more to recreate image managementinformation.• Recreating image management information takes time, so it isrecommended that you stop video transmission and uploadprocesses.[Memory Card] SD Memory Card Operations and SettingsThe following can be set here.• SD Card OperationsPerform SD memory card operations.• SD Card InformationDisplay information about the SD memory card.ImportantBe sure to perform the unmount process when turning off thepower to the camera or removing the SD memory card. Failingto unmount first may result in management file problems or theSD memory card becoming inaccessible.You can use the Memory Card Unmount Tool (p. 1-4) to mount/unmount memory cards from multiple cameras at the sametime.
