Preset Setting Tool6-216 Admin Tools(8) [Speed (Z)]Select [Slow] or [Fast] for the camera speed duringzoom.(9) [Pause (sec)]Set the time at which the camera stops at the presetposition between 0 and 120 seconds in 5-secondunits.(10)[Add]Add the preset to the tour schedule list.(11)[Change]Change the speed or pause time between presetsselected from the tour schedule list.Note• Preset tour is not performed while the camera is beingcontrolled with viewers, Admin Tools, etc.• Preset tour is not performed when control privileges areobtained by RM-Lite. Setting the Preset TourSelect [For Viewers] or [Always].The preset is registered in the tour schedule list. Up to20 presets can be registered.When [Preview] is clicked, the camera angle switchesto this preset, and the new angle can be checked inthe image display area.When you want to delete changes made to the tourschedule list and restore the settings registered in thecamera, click [Restore settings].When you complete setting the tour schedule list, click[Save settings]. The settings are saved in the camera.NoteThe home position cannot be added to the tour schedule list.1 Select the touring method from the [Preset Tour]selection box.2 Select the preset number you want to add to the tourschedule from the [Preset] selection box, and thenclick [Add].3 Select a preset in the tour schedule list and set thepan, tilt, and zoom speeds using [Speed (PT)], [Speed(Z)], and [Pause (sec)], as well as the time in secondsduring which the camera remains stationary at thepreset position.4 Click [Change].5 Click [Save settings].ImportantIf preset tour is used, do not use the intelligent function. Alsonote that when [Auto] is set under [Day/Night], the pause timemay lengthen as counting starts only after the pan, tilt, andzoom are in focus.
