2-72 Initial SettingsOnce initial settings are complete, check the image on thecamera with the VB Viewer. When doing so, set the PCnetwork settings to comply with the IP address andsubnet mask settings on the camera.The viewer launches and displays the camera image.If the top page of the camera does not appear or theVB Viewer does not launch, see “Troubleshooting”(p. 8-6) in “Chapter 8 Appendix.”Checking the Camera Image1 Click to select the camera's MAC address which will bechecked, and then click [Settings].2 This will launch the web browser and display the toppage of the camera. Click [VB Viewer].Important• The camera image cannot be checked until the networksettings in the PC are configured for the IP address andsubnet that are set in the camera.• Do not change the camera HTTP port from 80 if you want toopen the setting page by clicking [Settings]. See “HTTPServer” (p. 5-19) for more information on HTTP port settings.Click to select
