Print Job Results Abnormal 7-11Print Results Do Not Match Print Job ContentBroken lines visible.Problem 1: Printhead is out of alignment.Solution: Use the printer operation panel to align the printhead with “PositionAdjust”. (ÆP.7-31)Random, bizarre characters are printing.Problem 1: Data from the print job data stream has been lost.Solution: Switch the printer and computer off, then switch them on again and startthe print job again.Problem 2: Another printer driver was selected for the print job.Solution: Select the correct printer driver for the printer and try again. (ÆSetupGuide)Problem 3: The computer cannot communicate with the printer by bi-directional datatransfer when connected via the parallel port.Solution: Open the Setup Menu on the printer operation panel, select “SetCentronics” Interactive then select “None”. (ÆP.5-13)Problem 4: Font selected for printing not supported.Solution: Make sure that the font used in the text of the software application hasbeen installed correctly. For details, see your software application manual.The Thickness of Lines DifferentProblem 1: If you are using Windows XP or Windows 2000, the Fast Graphic Processsetting is selected.Solution: In the printer driver, open the Finishing sheet, open the Special Settingsdialog box, then click the Fast Graphic Process check box off, and printagain. (ÆPrinter driver Help)
