Error Messages 7-19Problem 2: The Media Size and Media Type set with the printer driver do not matchthe Media Size and Media Type set with the operation panel (as loaded inthe cassette.)Solution: Load paper of the size and type selected for the Media Size and MediaType selections on the Main tab of the printer driver. On the printeroperation panel, make sure that the Media Size and Media Type settingsfor the supply source match the size of the paper, then press the Onlinebutton. (ÆP.2-13)Use the Remote UI to cancel the print job when you want to release theerror and continue with the next print job. The print job cannot becancelled with the printer operation panel.No Media:ManualProblem 1: Paper could not feed from the tray.Solution: Load the media in the tray and press the Online button. (ÆP.2-17)Media JamProblem 1: Paper has jammed in the printer.Solution: Remove the jammed media and press the Online button. (ÆP.7-20)Load MediaProblem 1: The printer is waiting for paper or other print media to be loaded in thetray.Solution: Load the specified print media in the tray and press the Online button.(ÆP.2-17)Remove MediaProblem 1: The printer is waiting for removal of paper or other print media from thetray.Solution: Remove the paper or other print media from the tray and press the Onlinebutton. (ÆP.2-17)
