Troubleshooting7-42NoteNote8 Press or to display “ Adj. Setting ” then press .9 Look at the Adjust Paper pattern and determine the number of thehorizontal line that is least conspicuous. Press or to display thenumber then press .The selected setting is prefixed with an equals sign (=) to denote the currentsetting.Horizontal Lines conspicuous Horizontal Lines inconspicuousz If you want to print with higher print quality, perform “Print Pattern B” and adjustthe setting after performing “Print Pattern A”. Repeat the same procedure fromStep 3 to Step 9 to perform “Print Pattern B”. In that case, select Print Pattern inStep 7. After selecting “Print Pattern B”, perform “Adj. Setting” again.10 After adjustment of the LF setting is finished, press the Online buttonto switch the Online lamp on.When “Ready” is displayed on the operation panel, the printer is ready toprint.z If you mistakenly alter the settings on the operation panel, the printer may printwhite or dark streaks.z However the setting value of the print patterns may show different numbers from-28 - +28, you can not select these numbers on the operation panel.P l a i n P a p e rA d j . S e t t i n g →A d j . S e t t i n g1 →
