Preparation22ELoading a Cassette1. Make sure that you have inserted a power source.2. Slide the EJECT 5 button across to release the cover.• Wait a couple of seconds for the cassette compartment to open automatically.3. Load or unload the cassette.• Insert the cassette gently with the window facing out.• Remove the cassette by pulling it straight out.4. Press the P mark on the compartment until it clicks.5. Click the cover back into place.* D is a trade mark.Notes:• After loading a cassette, use record search (p. 45) to find the point where you want to start recording.• Do not interfere with the cassette compartment while it is opening or closing automatically, or attempt toclose the cover.• Do not leave the cassette in the camera after use — return it to its case and store it in a cool, clean, dryplace.• Close the inner door before closing the outer door.EJECTCLOSE THIS FIRST.Loading and unloadingUse videocassettes marked with the D logo only.*