RecordingE58Set the fade trigger each time you wish to use it(both before you fade in and again before you fadeout).FADE-T is shown constantly in the viewfinderwhen it is ready for use.1. Turn the POWER dial to any recordingprogram (except Easy Recording).2. Press the D.E./BARS SELECT button tomove through the list of effects in theviewfinder, until you reach FADE-T.D.E./BARSSELECTON/OFFPOWERVCROFFTvAvMAActivating the fade triggerWhen you start recording, the scene graduallyfades in from a black screen. When you stoprecording, it gradually fades out.Fade triggerFading In and Out Between ScenesE - TF A DNo DisplayO O MD . ZBC L R SA R• The flashing display changes to show which effect you can select.3. Press the D.E./BARS ON/OFF button to set the fade trigger ready for use.• FADE-T is shown constantly in the viewfinder.4. Start or stop recording.• The fade trigger is now activated — the scene will fade in or out.• FADE-T then starts to flash again in the viewfinder.• If you wish to use the fade trigger again, press the D.E./BARS ON/OFF button. If not, you can pressthe D.E./BARS SELECT button to select a different digital effect, or to turn the digital effects offcompletely by choosing the blank display.* “D. ZOOM” may not appear according to the lens you use.*
