Preparation24ESupporting the Camera• For extra comfort and control, attach the shoulderpad to the camera.• Clip the adapter unit onto the base of thecamcorder and tighten the fixing screw using acoin.• When you are not using the shoulder pad, fold itin towards the camera until it clicks into thestorage position.Prepare the lens capAttach the SP-100 shoulder padAdjust the grip beltAttach the shoulder strap• Attach/remove the lens cap as shown.Notes:• Place the camera on a table or secure surface when attaching the shoulder pad, grip belt or strap.• Adjust the length of the grip belt strap so thatyou can operate the start/stop button and zoomcontrol effectively.• For extra security and portability, attach theshoulder strap before using the camera.• Pass the ends through the attachment bars andadjust the length as shown.• Be careful not to leave the viewfinder exposed to bright sunlight, or it may damage the LCD. (The lightis concentrated by the viewfinder lens.) Either turn the EYE POINT SELECT switch to the FARsetting, or change the angle of the viewfinder to move it out of direct sunlight.
