PlaybackE83Connections for Playback on a TV ScreenFor higher picture quality, we recommend playing back recordings on a TV with an S (S1) terminal. If youconnect the camcorder to a TV with an S1 terminal or the Video ID-1 system, recordings made in the 16:9mode for wide screen TVs will automatically play back in wide screen mode on the TV screen.See your TV or VCR instruction manual for further details.• Use the S-150 S-video Cable to connect the S-video terminal d. Use the STV-150 Stereo Video Cable, toconnect the AUDIO terminals. Connect the white plug to the white AUDIO terminal 7 (left). Connect thered plug to the red AUDIO terminal 9 (right). Do not connect the yellow plug.• Set the TV/VIDEO selector on the television to VIDEO.• If you are connecting the camera to a VCR, set the input selector on the VCR to LINE.LRVSS-VIDEOVIDEOSTV-150 Stereo Video CableS-150 S-video CableRLAUDIOIf your TV (or VCR) has an S-video input terminalIf your TV (or VCR) has audio/video input terminalsRLAUDIOVIDEOSTV-150 Stereo Video CableLRVS• Connect the camera using the STV-150 Stereo Video Cable. Connect the white plug to the white audioterminal 7 (left). Connect the red plug to the red audio terminal 9 (right). Connect the yellow plug tothe yellow video terminal 0.• Set the TV/VIDEO selector on the television to VIDEO.• If you are connecting the camera to a VCR, set the input selector on the VCR to LINE.Note:• If you are going to use the TV as a monitor while you are shooting, remember to keep the TV volumeturned down as long as the camera’s audio terminals are connected to prevent feedback.If your TV is already hooked up to a VCR, you can connect the camera to the VCR instead of the TV.Follow the instructions above.