Recording Motion JPEG Movies on a Memory CardYou can record Motion JPEG movies with the camcorder, from a tape in the camcorderor from devices connected via the DV terminal or the AV terminal. The sound of amovie recorded on a memory card will be monaural.1. Press the start/stop button to begin recording.• You can keep recording until "CARD FULL" appears (max. 60minutes).• With MultiMediaCards, the recording time is limited to 10 sec.in 320 x 240 pixels and 30 sec. in 160 x 120 pixels.2. Press the start/stop button to stop recording.) Do not turn off the camcorder, change the position of the TAPE/CARD switchdisconnect the power source, open the memory card cover or remove thememory card while the card access indicator is flashing. Doing so could resultin data damage.OWhen you are using a SD Memory Card, make sure that the protect switch isset to allow recording.O Do not load/unload a cassette during recording.OWe recommend using a SD Memory Card right after you have formatted itwith this camcorder. Recording may be interrupted when you use memorycards with slow writing speed, or when recording and erasing has beenrepeatedly performed on a memory card.) To use the self-timer (IZ]] 58), press the _ (self-timer) button before step 2and press the start/stop button.::) You can select the focusing point wl_en recording a movie on the memory _card. _'-"Recording f_om a Tape in _he _amcQ_der ............................................................&1. Play back the tape.2. Press the start/stop button when the scene you wish to record appears.3. Press the start/stop to stop recording.101