Canon ZR80 Instruction Manual

Also see for ZR80: Instruction manual Instruction manual Brochure

PlaybackPressing the playbackbutton does not startplayback.Image will not appearon the TV screen.Tape is running, butimage will not appearon the TV screen.Set the camcorder to PLAY(VCR) mode.Load a cassette.Rewind the tape.Camcorder is turned off, or isnot set to PLAY (VCR) mode.Cassette is not loaded.Tape reached the end (_1 ENDflashes on the screen).[AV/PHONES_] is set to[PHONES_] in the menu.[AV ,,_ DV OUT] is set to[ON].TV/VIDEO selector on the TVis not set to VIDEO.Video heads are dirty.You attempted to play backor dub copyright protectedtape.Speaker volume is turnedoff.Set [AV/PHONES_] to [AV] inthe menu.Set [AV ,,_ DV OUT] to [OFF].Set the selector to VIDEO.Clean the video heads.Stop playback/dubbing.331633368536135No sound from the built- Adjust the volume with the 35in speaker. SETdial.Memor Card OperationProblem CauseMemory card cannot be Memory card was not facinginserted, the correct direction.Memory card cannot be Memory card is full.recorded.Memory card cannot beplayed back.Image cannot be erased._ flashes red.Memory card is notformatted.Memory card is not inserted.File number reachedmaximum value.SD Memory Card is_rotected.Camcorder is not set toCARD PLAY mode.Memory card is not inserted.Image is protected.SD memory card is_rotected.Card error occurred.SolutionTurn the memory card overand reinsert it.Replace the memory card orerase images.Format the memory card.Insert a memory card.Set [FILE NUMBERS] to[RESET] and insert a newmemory card.Change the position of theprotect switch.Set the camcorder to CARDPLAY mode.Insert a memory card.Cancel the protection.Change the position of theprotect switch.Turn off the camcorder.Remove and reinsert thememory card. Format thememory card if flashingpersists._39292117929592I069210992117142