Canon iR 3250 Network Manual

Also see for IR3250: User guide Reference guide Maintenance Guide

Contents

NetWare Print Service Settings3-43 Using a NetWare Network(Windows)NetWare Print Service SettingsIn order to print using a NetWare network, it is necessary to enter print service settings includingprint server and queue settings.IMPORTANT• The following procedures illustrate a sample NetWare setup procedure. Depending on your environment,the actual setup procedure may differ.Types of Print ServiceBefore entering print service settings, refer to the following descriptions to determine the type ofprint service you are using.Novell Directory Service (NDS) and Bindery ModeNetWare 3.2 uses a network database called Bindery, and NetWare 4.1 or later and NetWare 5 usethe Novell Directory Service (NDS). The machine network supports both NDS and Bindery mode.Determine the appropriate mode according to the network environment you are using. (If you areusing NetWare 3.2, only the Bindery mode is available.)Queue Server Mode and Remote Printer ModeThe machine supports printers in either of two operation modes, the queue server mode or remoteprinter mode.Queue Server ModeWhen the machine is used in the queue server mode, all printer server functions are providedby the machine itself, and no other print server hardware or software is required. In NDS queueserver mode (NDS PServer), the NDS print server is used for printing. In Bindery queue servermode (Bindery PServer), the Bindery mode print server is used. In queue server mode, a sepa-rate NetWare user operating licence is required for each machine.Remote Printer ModeWhen the machine is used in the remote printer mode, it is controlled by the NetWare printserver. Therefore, the machine uses a print server in addition to the network. The machineprints using the NDS print server in NDS remote printer mode (NPrinter), and the Bindery printserver in Bindery remote printer mode (RPrinter).IMPORTANT• Normally with NetWare 4.1 or later, the NDS printer service should be used, and with NetWare 3.2, theBindery print service should be used. This manual describes procedures for these two combinations only.• With NetWare 5, the NDPS can be used. When using the NDPS, the gateway should be the Novell printergateway provided with NetWare. This manual does not describe NDPS settings. Refer to the NetWaremanual.