Canon iR 3250 Network Manual

Also see for IR3250: User guide Reference guide Maintenance Guide

Contents

Protocol Settings 3-93 Using a NetWare Network(Windows)Protocol SettingsThis section describes how to enter Ethernet driver settings, and the machine’s NetWare protocolsettings.These settings are entered from the machine’s control panel.NOTE• If you are able to use the TCP/IP protocol, you can enter settings using the Remote UI. (The Remote UIenables you to enter a variety of settings for the machine from a computer with a web browser.) Forinstructions on using the Remote UI, see the Remote UI User’s Guide.Settings from the Control PanelIMPORTANT• Settings made from the control panel become enabled when the machine is restarted after the procedure.• For details about entering characters using the touch panel display, see the User’s Guide.Setting Up the Ethernet DriverFor Ethernet driver settings, see “Setting Up the Ethernet Driver,” on p. 2-5.Setting Up NetWare1 Press the key.2 Press the [System Settings] key.IMPORTANT• If the message “Enter the System ManagerID and Password using the numeric keys,”appears in the touch panel display, enter theSystem Manager ID and password. Forinstructions on entering the System Man-ager ID and password, see the User'sGuide.AdditionalFunctions