Scanning7-5Basic Scanning OperationsSending documents from a computer and scanningdocuments over the network cannot be processed at thesame time. If this happens, these documents are handleddifferently depending on the following:If you send PC documents when the machine is scanningdocuments, the machine scans documents first, then startssending the PC documents when scanning is complete.If you scan documents when the machine is sending PCdocuments, scanning is canceled. Wait for the PCdocuments to be sent out, then perform the scanningoperation again.Printing documents from a computer and scanningdocuments over the network cannot be processed at thesame time. If this happens, these documents are handleddifferently depending on the following:If you print PC documents when the machine is scanningdocuments, an error may occur. In this case, the machinescans documents first, then starts printing the PCdocuments when scanning is complete.If you scan documents when the machine is printing PCdocuments, scanning is canceled. Wait for the PCdocuments to be printed out, then perform the scanningoperation again.1 Place documents.2 Press [SCAN] repeatedly to select.3 Start Color Network ScanGear from theapplication on your computer.For details, see “Scan,” in the e-Manual.4 Make scan settings on the [Main],[Options], and [Scanner Info] sheets.For details about the settings in each sheet, referto the Online Help for that sheet.–••–••5 Click [Scan].Color Network ScanGear Main Window closesand the scanned image is transferred to theapplication. During scanning, a scanningprogress dialog box is displayed. To interruptscanning, click [Cancel].Canceling Scan Jobs to a ComputerCanceling Scan Jobs to a ComputerConnected with USB CableConnected with USB CableFollow the procedure below to cancel an ongoingscan job via USB.1 Press [Stop/Reset].2 Click [OK] on the computer screen.
