Copying4-212-Sided Copying7 Press [Start].To cancel all settings, press [Stop/Reset].When you switch the mode by pressing themode keys such as [FAX], all settings willbe canceled. If you want to keep the settings,store the settings as follows:[Menu] → → SETTINGS> → <2-SIDED> (See “COPY SETTINGS,”on p. 12-4.)You can skip steps 5 and 6. In this case, themachine scans 2-sided documents in the orientation and outputs thesame way.If you press [Start] in step 5 after selected, the machine scans 2-sideddocuments in the orientation and outputs the same way.––––2 to 1-Sided Copying (MF4380dn2 to 1-Sided Copying (MF4380dnOnly)Only)You can make 1-sided copies from 2-sideddocuments.1 Place documents in the ADF.For details, see “Placing Documents,” on p. 2-4.2 Press [COPY].3 Press [2-Sided] to select <2 >1-SIDED>,then press [OK].2 > 1 - S I D E D2 - S I D E D4 Press [ ] or [ ] to select TYPE> or , then press[OK].B O O K T Y P ET Y P E O F O R I G I N A L: The front and back sides of thedocument have the same top-bottomorientation.: The front and back sidesof the document will have the opposite top-bottom orientation.5 Use – [numeric keys] to enter thedesired copy quantity (1 to 99).T E X T / P H O T O 11 0 0 % * L T REx.6 Press [Start].To cancel all settings, press [Stop/Reset].When you switch the mode by pressing themode keys such as [FAX], all settings willbe canceled. If you want to keep the settings,store the settings as follows:[Menu] → → SETTINGS> → <2-SIDED> (See “COPY SETTINGS,”on p. 12-4.)You can skip step 4. In this case, the machinescans 2-sided documents in the orientation to make 1-sided copies.–––––
