| 
11-17TroubleshootingError MessagesMessage Description ActionLOAD CORRECTPAPERThe size of the paper in the paper cassetteor multi-purpose tray is different from thatof the paper specified in for or .Load the correct size paper or change thepaper size in for or . For details, see “If CORRECT PAPER> is displayed,” on p. 11-20.LOAD PAPER No paper is loaded in the paper cassetteor multipurpose tray when copying orprinting.– Load paper correctly. Then press [OK] whenusing the paper cassette.–No paper is loaded in the paper cassetteor multi-purpose tray when printing areceived document.Or, when printing a report or list, thismessage appears if the paper size is notappropriate for printing a report or listeven if paper is loaded. This error messageappears with one of the messages below. PAPER SETTINGS>– Load paper correctly. Then press [OK]when using the paper cassette. For reportor list, set the paper size to , ,, , , ,, LETTER>, , or, and then load paper of thesame size.–LOST IMAGE The machine was turned OFF withdocuments stored in the machine’s memory.Please note that any data stored in thememory, including received fax documents,will be deleted if you leave the machineturned OFF for about 5 minutes.The error is automatically released after twoseconds, and the machine automaticallyprints out the lost report that shows therecords still existing in the activity report.MEMORY FULL The machine is full of jobs.– Print, send, or delete any documentsstored in memory.Divide the document stack or data into afew parts and try again one by one.Send the document with low resolution.–––The number of TX/RX jobs that can bestored in memory reached the Maximum.– The machine memory can store up to 256fax jobs including sending and receivingjobs. (Based on the condition that the otherparty sends the fax by the imageCLASSMF4380dn with ITU-T Standard Chart No.1,standard mode.) Wait for the machine tosend any faxes in memory. Also print ordelete any documents in memory.–NOT AVAILABLE You pressed the one-touch key that hasalready been registered, when you areregistering group dialing.– Register the one-touch key that is not used.You selected the group dialing that hasalready been registered, when you areregistering a one-touch key.–NOT REGISTERED No recipient is registered for the one-touchkey or coded dial code you pressed.Register the recipients before using theAddress Book function.OUT OF TONERCHANGE TONERThe toner ran out completely. Replace the toner cartridge. |
