Canon imageFORMULA DR-G1100 Series Service Manual

Also see for imageFORMULA DR-G1100 Production Document Scanner: User manual Specification

imageFORMULA DR-G1130/DR-G1100 Series Service GuideimageFORMULA DR-G1130/DR-G1100 Series Service Guide April 2013Rev. 1 Page 11H. Recommended Replacement PartsThe Recommended Replacement Parts in the following table are suggested to bekept in stock by the Dealer, for replacement purposes, in the event of a hardwarefailure.Note: All recommended replacement parts shown in the below table are forreference purposes only and are subject to change without notice.Recommended Replacement Parts (Table 10)Part Name Part Number1 Quantity RemarksRegistration roller lower MF1-4795-000 1Because of the worn rollers, it isnecessary to replace them whena document jams or feed failuresoccur after the roller cleaning.Note:1) The parts that are marked *1are used in the parts catalog.2) Because of the expected life ofelectrical conductivity, replace thebearing at the same time. Theparts numbers are different, butspecifications are the same as theimageFORMULA DR-9050C.3) The registration roller upper-front and reading roller upper arethe same shape, but its color ofgear is different. Registrationroller one is black and the readingroller is white.Bearing MS2-9004-000 2Platen roller MA2-8591-000 2Bearing MS2-9003-000 4Reading roller lower MF1-4597-000 1Bearing MS2-9004-000 2Front U-turn roller (drive)(ROLLER, U-TURN PRE,LOWER *1)MA2-8646-000 1Bearing MS2-9004-000 4Rear U-turn roller (drive)(ROLLER, U-TURN,LOWER *1)MA2-8647-000 1Bearing MS2-9004-000 2Eject roller (drive) MA2-8733-000 1Bearing MS2-9004-000 2Registration roller upper-front MF1-4797-000 1Bearing MS2-9003-000 2Reading roller upper(ROLLER,REGISTRATION UPPER*1)MF1-4242-000 1Bearing MS2-9003-000 2Front U-turn roller(follower) (ROLLER,READING UPPER *1)MA2-6847-000 1Bearing MS2-9003-000 2Rear U-turn roller(follower) (ROLLER, U-TURN, UPPER *1)MA2-8665-000 2Bearing MS2-9003-000 4Eject roller (follower) MG1-4801-000 1Upper reading unit (front) MG1-8318-000 1 Replace if an image failure occurs.Lower reading unit (Back) MG1-8319-000 11 Item Numbers and Part Numbers are subject to change due to engineering changes, etc.