Canon imageFORMULA DR-M160II Service Manual

Also see for imageFORMULA DR-M160II: User manual User manual

Contents

imageFORMULA DR-M160II Service GuideimageFORMULA DR-M160II Service Guide June 2014Page 10E. Estimated Installation Time (End-User)The estimated installation time to unpack and install the machine isapproximately 10 minutes. The estimated installation time is based on anend-user completing the installation and is for reference purposes only.Excluded from the estimated installation time is the time to prepare theinstallation space, the time to setup the Desktop PC, and the time to setupand install the imageFORMULA Flatbed Scanner Unit.F. Recommended Computer Requirements (End-User)The following are the Desktop PC or Laptop specifications4 to use with theimageFORMULA DR-M160II: CPU: Intel Core i7 2.8 GHz or faster Memory: 4 GB or more Hard disk: 3 GB or more available space required for software installation USB interface: Hi-Speed USB 2.0 Monitor: Resolution of 1024 x 768 (XGA) or better recommended Optical drive: Drive capable of reading DVDs Operating system Microsoft Windows XP Service Pack 3 or later Microsoft Windows XP x64 Edition Service Pack 2 or later Microsoft Windows Vista Service Pack 2 or later (32-bit/64-bit editions) Microsoft Windows 7 Service Pack 1 or later (32-bit / 64-bit editions)Other requirements: An ISIS-compatible application or a TWAIN-compatible application that iscompatible with the above operating systems. .NET Framework 3.5 or laterG. Special ToolsIn addition to the standard tools used to service this device, the followingspecial tools should also be carried by the service technicians when servicingan imageFORMULA DR-M160II.Table 11 – Special Tools ListDescription Part Number2 RemarksShading sheet TKM-0326TKM-0332 Used to adjust the light (10 sheets/1 set)Scale parameteradjustment sheet TKM-0271 Used for the scale parameter adjustment Can also becreated from copier paper by the service technician.Test sheet TKM-0271 Used for image display checking (10 sheets/1 set)2 Item Numbers and Part Numbers are subject to change due to engineering changes, etc.4 Specifications are subject to change without notice.