Setting Item Description, InstructionsJob Log (Choose from information aboutthe last three print jobs.) Adjustment req. A counter for maintenance pur-poses. Indicates adjustmentconditions appliedto jobs.Print Job Log Print a record of print jobs, in-cluding the paper type and size,amount of ink consumed, and soon. Ink consumption indicates arough estimate of the amount ofink consumed per print job.(*1)Pause Print Choose On to stop printing.*1: A rough estimate of the amount of ink consumed per print job is displayed. Actual ink consumption may be different. The average marginof error for estimates calculated according to Canon measurement conditions for ink costs is ±15%. Canon does not guarantee theaccuracy of these estimates. Estimates may vary depending on conditions of use. Calculation of these estimates does not include inkconsumed when cleaning printheads by forceful ejection of ink.Set./Adj. MenuLimited items are displayed during printing. The displayed items are indicated by annotations.Setting Item Description, InstructionsTestPrintNozzle Check Print a test pattern to check the nozzles.Status Print Print information about the setting values and condition of theprinter.Interface Print Print interface settings information.Paper Details Print the paper settings as specified in Paper Details.Print Job Log Print a record of print jobs, including the paper type and size,amount of ink consumed, and so on. Ink consumption indicatesa rough estimate of the amount of ink consumed per print job.(*1)Menu Map Print the menu structure.AdjustPrinterHeadPosi.Adj.Standard An adjustment pattern is printed and the print position is auto-matically adjusted to fix misaligned printing. Select Standard ifvertical lines in printed material are warped or colors are out ofalignment. Select Standard also if the printing results are notimproved by executing Simple. (See "Automatic Adjustment toStraighten Lines and Colors.") →P.730Simple An adjustment pattern is printed and the print position is auto-matically adjusted to fix misaligned printing. Simple executes asimple adjustment in a short time. Select Simple when fre-quently adjusting the printhead, such as during daily mainte-nance. (See "Automatic Adjustment to Straighten Lines and Col-ors.") →P.730Other Initial adjustmt Printhead position adjustment is executed during the initial set-up. If adjusting the printhead position has not been performedsuch as due to an error during initial setup or the state of theoperating settings when replacing the printhead, select Initialadjustmt. (See "Adjustment When Installing the Printhead.")→P.734iPF6400 Menu SettingsUser's GuideControl Panel Printer Menu651
